PAG Paglight Halogen

Tungsten halogen news interview light

Soft, even spectral distribution

Fully focusable from spot to flood

Cool-running design

Rugged yet lightweight impact resistant construction

Includes Standard halogen lamp holder

20W, 35W, 50W, 75W or 100W lamps sold separately

This is the recommended model for cameras powered by Ni-MH or Ni-Cd Gold Mount batteries

Patented interchangeable lamp unit design also accepts LED and HMI arc lamp units – one light does it all

Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on a battery mount

Includes 1/4” Stud Adaptor and Camera Shoe Plate

A Rotatable Accessory Kit that has a filter to convert halogen to daylight colour temperature is sold separately

Reflector 45mm dia.

70mm wide x 103mm long x 115mm high
Paglight is the ultimate TV News camera top-light.

Paglight has a revolutionary patented design which allows a range of professional lighting technologies to be used with one lamp head. Interchangeable tungsten halogen, LED or HMI arc lighting modules, plug into the back of the reflector housing. They can be hot-swapped quickly and safely, in a matter of seconds. Paglight is the only broadcast light with this feature, providing you with the correct lighting technology for any professional situation.

This model incorporates a Standard halogen lamp holder for use with Ni-MH and Ni-Cd batteries. 20W, 35W, 50W, 75W or 100W long-life halogen lamps are available for use with this model.

Paglight has an output that is soft and even. The lamp head incorporates a spot to flood feature for additional control, a feature not commonly found in camera top-lights.

The light is designed to be cool-running at all times and easy to handle.

The lamp body has a multi-directional mounting and may be adjusted vertically and horizontally. The desired position can be maintained by a locking lever situated on the side of the light base.

Paglight is supplied with a detachable hot-shoe Power Base that enables you to quickly attach the light to the camera, and remove it after shooting, leaving the power connection in place. This model incorporates a Power Base that has a cable length of 500mm, terminated with a D-Tap plug, for connection to the output on a battery mount fitted to the rear of the camera.

Paglight can be mounted to the camera using the 1/4” stud adaptor or the camera shoe plate supplied with the light.

Specification:
Paglight:

Voltage: Nominal 12V to 14.8V battery supply.

Maximum Power Rating: 100W lamp with 13.2V battery.

Spot and Flood Angles:
Flood 62°.
Spot 22.6°.

Dimensions:
Height: 115mm (4.5”).
Width: 70mm (2.7”).
Depth: 103mm (4”).
Without accessory kit, plug-in lamp unit or power base.

Weight: 233g (8.2oz) without accessory kit, plug-in lamp unit or power base.
Reflector size: 45mm (1.8”) dia.

Standard Halogen Lamp Holder:

Lamps: Low-voltage bi-pin, long-life halogen capsules (2000 hours at 12V approx.).

Voltage: Nominal 12V.

Watts: 20W, 35W, 50W, 75W or 100W.

Colour Temperature: 3200°K at 12V (5600°K with dichroic filter).

Filament: Axial filament with centre 30mm from end of pins.

Base: Type GY6.35.

Dimensions:
Height: 47mm (1.8”).
Width: 40mm (1.6”).
Depth: 97mm (3.8”).
With lamp protector.

Weight: 58g (2oz) With lamp and lamp protector.

Power Base:

Connector: 2-pin D-Tap type.

Lead Length: 500mm (19.7”).